Sanghvi Industrial Electronics

HE1aN-W-DC12V-Y6 Power Relay is a high-performance general-purpose relay designed for demanding applications such as solar inverters, automotive systems, and industrial control circuits. Manufactured by Panasonic Electric Works, this relay is part of the HE-PV series and is known for its robust specifications and reliability.

n 6 pole relay with force guided contacts according to EN 50205 n Reinforced insulation between all contacts  Typical applications Emergency shut-off, press control, machine control, elevator and escalator control, safety relays Approvals VDE Cert. No. 128935, UL E214025, TUV 968/EL 350, CCC 2012010304537809 Technical data of approved types on request

T92S7D12-12 RELAY Potter & Brumfield
T92S7D12-12 RELAY Potter & Brumfield
T92S7D12-12 RELAY Potter & Brumfield

n 30/40/50A switching capability n Designed to control compressor loads to 3.5 tons, 110LRA / 25.3FLA n Meets requirements of UL 508 and UL 873 spacings - 8mm through air, 9.5mm over surface n Meets requirements of VDE 8mm spacing, 4kV dielectric coil-tocontact n Meets requirements of UL Class F construction n UL approved for 600VAC switching (1.5HP) n Screw terminal version (consult factory for availability, ratings) n Anti-explosive version available (Meets EN 60079-15) n WG version available (Meets EN 60335-1)

• One pole carries 40 A. UL NO contacts (resistive 40 A 480 VAC, 60 Hz, 80,000 operations). EN 60947-4-1 NO contacts (AC1 40 A 440 VAC, 50/60 Hz, 80,000 operations). • Ideal for supply power to industrial inverters, servo drivers, and other devices, and switching power to motors and other equipment. • The maximum load capacity of 160 A when using 4-pole parallel connections. • EN 60947-4-1 certification for mirror contact mechanism obtained by combining the Relay with an Auxiliary Contact Block. • Conforms to European PV standard (VDE0126). • Approx. 30% less operation noise than a standard electromagnetic contactor.* (Approx. 100 dB reduced to approx. 70 dB.) • Approx. 50% the volume of a standard electromagnetic contactor* to help downsize control panels. 

Compact Electromagnetic Contactors That Switch 40 A at 440 VAC • One pole carries 40 A. UL NO contacts (resistive 40 A 480 VAC, 60 Hz, 80,000 operations). EN 60947-4-1 NO contacts (AC1 40 A 440 VAC, 50/60 Hz, 80,000 operations). • Ideal for supply power to industrial inverters, servo drivers, and other devices, and switching power to motors and other equipment. • The maximum load capacity of 160 A when using 4-pole parallel connections. • EN 60947-4-1 certification for mirror contact mechanism obtained by combining the Relay with an Auxiliary Contact Block. • Conforms to European PV standard (VDE0126). • Approx. 30% less operation noise than a standard electromagnetic contactor.* (Approx. 100 dB reduced to approx. 70 dB.) • Approx. 50% the volume of a standard electromagnetic contactor* to help downsize control panels. * According to OMRON investigation of IIEC-AC1 50 A specifications. 

V23050-A1024-A551 RELAY
V23050-A1024-A551 RELAY
V23050-A1024-A551 RELAY
V23050-A1024-A551 RELAY

The G3841-48030 is an industrial relay, a type of electrically operated switch that can be used to control circuits and turn on/off equipment like motors and lights. It acts as an intermediary, receiving an electrical signal and then sending a signal to other devices by switching its contacts.

The AEVT760122 is a Panasonic 4-pin Toyota hybrid relay, often used in automotive applications, specifically for high-voltage DC circuits. It's a power relay designed to switch higher currents, typically up to 60A, and operates on a DC voltage.